The Emergency Exit Gate is ideal for use in areas where barriers would prevent access to emergency exit doors. The gate arm will open in the exit direction through 90 degrees only under the preset pressure and will ermain open until manually reset. 

The Emergency Exit Gate is available with a standard gate arm or with asupport leg. The base of the leg has awheel fitted for smooth operation when opening. a range of No Entry and Emergency Exit signs is available.

The Emergency Exit Gate has a mild steel body in bright chrome, although other finishes are available (RAL colour of choice or Satin Chrome). Arms are available in 500mm - 1000mm in 50mm increments. There is an option to fit a full depth arm with either a perspex or white infil panel. For an audible or visiual indicator a flashing top light which operates 24v DC or alarm is a factory fitted extra. The alarm is fitted to the main upright and controlled by a 12v DC transformer. Manual breakout is available in cases of emergency and requires to be manually reset.

                           

Gates ae on 1060mm uprights. Standard finish bright chrome plate with white infil panel to arm. Before ordering calculate the gap minus 150mm for the arm length (e.g Gap = 750mm minus 150mm = arm length of 600mm) The arm direction is worked out by imagining you are standing behind the gate in which direction would the arm move if someone walked through? To your left or to your right? If it move to the right order a right handed gate. Fixings must be ordered separately